#PROLIFIC USB TO SERIAL DRIVER 3.3.2.102 HOW TO#
#PROLIFIC USB TO SERIAL DRIVER 3.3.2.102 INSTALL#
#PROLIFIC USB TO SERIAL DRIVER 3.3.2.102 DRIVERS#
#PROLIFIC USB TO SERIAL DRIVER 3.3.2.102 SOFTWARE#
#PROLIFIC USB TO SERIAL DRIVER 3.3.2.102 WINDOWS 7#

Matos (DG Member): 'This is for a USB to Serial Adapter which has no brand, but only a model number of GMUSThe chip in it is actually a Prolific PL are the drivers for it. Prolific provides highly compatible Virtual COM Port drivers that simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready. PLRA provides a convenient solution for connecting an RS full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. Searched all over the internet and found tons of driver (ser2pl(64).sys) versions ranging from to, but despite all the efforts none worked for me and looking at all the posts here.

Solved for me: Win7 with Sitecom CN V2 (older PL based cable) Seems like there are a lot of people experiencing problems with PL based USB to Serial cables in Win7 or Vista.

#PROLIFIC USB TO SERIAL DRIVER 3.3.2.102 SOFTWARE#

Your Pinewood Derby Track, Pinewood Derby Timer, Pinewood Derby Race Management Software Source.Prolific pl2303 driver version 3.3.2.105 downloadįullversion Prolific Usb To Serial Driver Download + Crack

Once you have successfully installed your USB/Serial Adapter Click here to read and/or download our help sheet on getting started with your SuperTimer II.īecome a fan of SuperTimer on Facebook and get notified of important product updates and other news.

The other settings on this dialog can be ignored as they are set automatically by RaceManager as needed. If all the numbers show 'in use' you can safely ignore that message and pick one of those numbers. If that is the case then in the Properties dialog (right picture above) select the 'Port Settings' tab, then 'Advanced', then on the bottom of the dialog set the Com number to something less than 20. In rare cases the COM number is greater than 20. If 'Roll Back Driver' is disabled, then try 'Update Driver', 'Browse my computer.', 'Let me pick from a list.' and then pick either 3.3.2.102 or 2.0.4.102 from the list depending on your operating system. They then disable the 'Roll Back Driver' button as well.

#PROLIFIC USB TO SERIAL DRIVER 3.3.2.102 INSTALL#

Some Windows systems automatically install a later version of the driver even when you try to install the older version. Devices shown under Universal Serial Bus Controllers or Human Interface Devices are not a valid installation of the adapter.ĭouble-click on the highlighted line to bring up the Prolific properties and be sure the Driver Version is 3.3.2.102 LATER VERSIONS WILL NOT WORK IN Windows 8! (Worse, they will appear to work but fail.) If the Revision shown is later, then use the 'Roll Back Driver' button and be sure you restart your computer once the older driver is installed. If the adapter driver you chose doesn't work in your computer.Įspecially with Windows 8, bring up search, type in Device, select Device Manager and be sure it matches the highlighted line (Prolific) on the left picture, (COM may not be 4). If there is any warning, then continue below. If it did you are ready to connect SuperTimer II and run RaceManager. The message MUST indicate that the computer SUCCESSFULLY found a serial port on ComX (X is any number from 1 to 20).

Plug in the Adapter and check the message in the lower right corner of your screen.

If it asks to remove a previous driver, do so, then run the Driver file again to install the new Driver.

Run the USB Driver file that you downloaded.

The USB to Serial Adapter (pre 9/2016) driver for Windows 2000 or Windows XP.

#PROLIFIC USB TO SERIAL DRIVER 3.3.2.102 WINDOWS 7#

The USB to Serial Adapter (pre 9/2016) driver for Windows Vista, Windows 7 or Windows 8.

This adapter can be distinguished from the previous adapter by the case, which is a dark translucent blue, and it has an indicator LED that illuminates when the adapter is plugged into a USB port.

Windows driver for the USB to Serial Adapter available beginning September 2016.

SuperTimer II is not required or useful at this time.

Unplug the USB to Serial Adapter from the computer.

Given the wide variety of operating systems called Windows, only time will tell. We believe that the steps listed below will solve those remaining issues. But most is not all, and for those who cannot successfully install the Adapter Driver, life is very frustrating. USB to Serial Adapter Installation Issuesįor most (nearly all) users, running the RaceManager installation file automatically and successfully installs the USB to Serial Adapter Driver software at the same time. Watch Pinewood Derby Racing on SuperTrack at the 2013 Grand Prix of Baltimore. Watch SuperTrack set the World Record for the longest (529 feet!) Pinewood Derby Track.

#PROLIFIC USB TO SERIAL DRIVER 3.3.2.102 HOW TO#

How to make a (really, really long) Pinewood Derby Track.

And Race Management Software Free Book - How to Run the Pinewood Derby

Prolific usb to serial driver 3.3.2.102